AUTOTEST - AUTOSTOP SUSPENSION TESTER

Autostop Suspension

We distributor AutoStop® Suspension Tester, Is a compact, battery-powered, hand held shock absorber tester that uses both the “Rebound Method” and “Damping Ratio.” Monitoring the vertical sprung mass movement of the vehicle to determine the performance of the individual shock absorber

  • 12-button phone keypad allows customer and vehicle details to be added immediately
  • Is installed in seconds on to the panel above the wheel being tested
  • Large display screen allows immediate analysis of results including graph
  • Capable of storing results of up to 100 vehicles Data logging download capability via serial interface
  • Data logging down load capability via serial interface
  • Immediate print capability via optional IRDA printer

The light transmission meter consists of a light sensor built into the body of the instrument, a precision light source and a LCD display.

By aligning the light source and the sensor on either side of the window, the percentage of light transmitted through the window is measured. The degree of visibility is obtained from the reading.

3 easy testing steps with AutoStop™ Suspension:

  • STEP 1: Attach Suspension Meter to the body panel nearest wheel being tested.
  • STEP 2: Turn on Suspension Meter, follow prompts and select wheel being tested
  • STEP 3: Push down on vehicle body panel nearest wheel being tested. Follow prompts to save or view test results. Repeat steps as required
Operation Installation Suspension

Features:

  • Determines tri-axial deceleration, forward as well as sideways deceleration (lane change)
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with the ECE R 13
  • Simple 16 button operation via a tactile membrane pad
  • Can be installed any where in the vehicle
  • Self-aligning by identifying its orientation at the beginning of each test
  • Lightweight (< 500grms) and compact (90 x 200 x 35mm)
  • LCD display
  • Adjustable display control
  • Automatic start function
  • Automatic shut-off after 10 minutes to preserve battery life (over 24 hours running time)
  • Built-in integrity check
  • Built-in real time clock
  • Calibration is internationally traceable through NATA
  • Calibration interval twenty four months
  • 12 months warranty
  • Internet support hotline for diagnostics