Cosber Industrial | KCS Series Speedometer Tester

Speedometer Tester

KCS Speedometer is designed to inspect the speed exactitude of a vehicle. Vehicle is able to running up to 120km/h on the roller of the tester, simulating the road condition without a real road test.

The vehicle speedometer tester is consisted of frame, pneumatic system, roller set, axle connector, tyre protector, sensor, signal generator, central lift and brake pad, etc.

When testing the vehicle speedometer, drive the vehicle onto the tester and make sure the driving axle is on the rollers. The roller is driving by the wheels while accelerating the vehicle. The line velocity of roller is the same as that of vehicle wheels, which is the actual vehicle speed. The instant line velocity of roller will be measured and displayed by the instrument. By comparing the values of vehicle speedometer and the result of the instant speed, the deviation of the vehicle speedometer can be obtained.

Roller line velocity will be transformed from roller rotation speed into electric signal by sensors. After catching by the Instrument, it will be calculated and displayed as vehicle actual speed. The Central Lift, which set between rollers, is to assist the vehicle drive on/off the tester. The Pneumatic Control System is composing of electromagnetism valve and air cell.

Speedometer Tester On Packaging

Main Features:

  • Using of reinforced steel, strengthen and durable structure body
  • High adhesion coating paint for long working life
  • High precision sensor and high roundness of roller to ensurethe exactitude of result
  • Roller brake pad system make sure the exit of vehicle
  • 0-120km/h measurement range
  • Wireless remote control
  • Standard RS-232 connection port
  • Air Lift bar
  • 4 each Safety roller
  • Can be integreated with 2 more equipment by VIS Control System
  • Display Indicator (PC or LED indicator)
  • Mini printer (Built-in)
Model KCS-3/10 KCS-15/18
Maximum axle load (kg) 3.000 / 10.000 15.000 / 18.000
Measuring Range (km/h) 0 - 120 0 - 120
Roller Dimensions (mm) Ø190 x 900 Ø190 x 1100
Roller Axle Separation 380 / 405 mm 405 mm
Power Supply AC 220V, 50Hz, ground AC 220V, 50Hz, ground
Air Supply (MPa) 0.5-0.6 / 0.7-0.8 0.7-0.8
Dimension (LxWxH) 3400 x 800 x 340 mm 3400 x 800 x 340 mm
Control Unit LED Indicator
Mini-printer Stylus type Stylus type
Dimension (LxWxH) 600 x 600 x 1600mm 600 x 600 x 1600mm
Power Supply AC 1 phase 220V 50Hz, earthed AC 1 phase 220V 50Hz, earthed