Cosber Industrial | KXJ Series Vehicle Suspension Tester

Suspension Tester

KXJ Vehicle Suspension Tester is used to inspect the shock absorption performance of vehicles which equipped with independent suspension. When the vehicle parking on the platform, the static wheel load will be measured by the sensor and displayed on the Monitor/Display Board.

Then the Motor will start to drive the Eccentric Wheel in the tester, which subsequently resulting the vibration of Vibrating Plate. The Motor will shut down automatically after reaching its nominal power. The plate will continue vibrating effecting by inertia and result in sympathetic vibration between wheels and suspension.

The minimum dynamic wheel load is obtained during the sympathetic vibration. Then the absorption rate (displayed as percentage) can be calculated. The higher the absorption rate, the better the performance of suspension of the vehicle.

Features:

  • EUSAMA measurement standard
  • Wheel load function integrated
  • Protection program by >200kg excited vibration
  • High precision sensor ensures the exactitude of inspection result
  • Galvanized plate for extra long service life
  • Result display with visual graph
  • Max. Drive-over Load (kg): 3000kg or 10.000kg
  • Max. Test Wheel Load (kg): 1500kg
  • Vibrate Plate Dimensions (mm): 700x300 or 650x400
Model
KXJ-3 PN:5202001
KXJ-3A PN:5202002
Max. Drive-over Load (kg)
3000
10000
Max. Test Wheel Load (kg)
1500
1500
Vibrate Plate Dimensions (mm)
700x300
650x400
Oscillation (mm)
6
6
Vibrate Ffrequency (Hz)
15 or 24
15
Motor Power (kW)
2.2x2/ 4.0x2
2.2x2
Cover Plate Dimensions (mm)
--
800x630
Cover Plate Stroke (mm)
--
650
Air Pressure (MPa)
--
0.5-0.7
Power Supply
AC 380V, 50Hz, ground
AC 380V, 50Hz, ground